Interlaced array of high rigidity alloy grinding pegs on internal surface of grinding chamber and external surface of rotator shall provide high impact and shear to grinding media and reduce dead area largely
Material of grinding chamber/ rotor: S.S.440C/ S.S.420
Discharge of products: with dynamic/static separating ring or static separating screen
Sealing mode of main shaft: with double face mechanical seal
Sealant circulating in mechanical seal is compatible with solvent in grinding media to avoid pollution to grinding media.
Cooling jacket outside sealant tank and cooling jacket outside grinding chamber are adopted to cool down mechanical seal and grinding media.
Cooling system inside hollow rotor is available on HBM with separating ring.
Adjustable range of pressure limit switch at material inlet: 0-6 bar
Adjustable range of temperature limit switch at product outlet: 0-100ºC
Fault alarm on control panel shall be activated in such cases:
Pressure of cooling water: too low
Working pressure in grinding chamber: too high
Temperature at product outlet: too high
Level of coolant for mechanical seal: too low
Motor load: overload Application:
Wet grinding of paint, ink, printing ink, dye, pesticide, color paste,
lithium battery, etc. Technical data:
|Main Motor Power(KW)||7.5||11||22|
|Main Shaft Speed(r.p.m.)||1800||1100||900|
|Capacity of grinding chamber (L)||5||15||25|
|Cooling Water Consumption(m3/h)||0.8||1.2||1.5|
|Compressed Air Pressure(MPa)||0.6-0.8|
|Grinding media||Φ0.4-1.2mm 94.50%+ ZrO2 Beads|
|Material feeding||By diaphragm pump/gear pump|